The Total Data Recovery Professional Course is designed to provide a comprehensive understanding of data recovery from various storage devices such as HDD, SSD, SCSI / SAS drives, Flash drives, SD cards, and RAID arrays. Participants will learn how to identify and diagnose common issues with HDD, SSD, SCSI / SAS drives, Flash drives, SD cards, and RAID arrays and use PC3000 products to perform advanced data recovery techniques. By the end of the course, participants will gain the confidence and expertise necessary to successfully recover data from even the most challenging HDD data recovery scenarios using the PC3000 products.
This module provides an overview of different types of storage devices and hard disks, their recording technologies, and file systems. Participants will learn data recovery using top data recovery software for logical issues such as data corruption, partition deletion, formatted, and deleted data.
Hard Disk Basics
Data Recovery using DR Software
This module focuses on data recovery from hard disks, Flash drive, SD card & NVMe with firmware/data access issues. It covers top market recovery software, PC-3000 products, firmware repair, and diagnosis of HDD issues. Participants will learn an overview of PC-3000 Data Extractor and the procedure for recovering lost partitions, deleted files using different parameters. This module covers firmware repair and data recovery from Seagate, WD, Toshiba, and Samsung hard disks using PC3000.
Data Recovery from HDD with Firmware Issues
Data Recovery from HDD, Flash Drive & SD Card with Data Access issue using PC3000
Data Recovery from Seagate Hard disks using PC3000
Data Recovery from WD Hard disks using PC3000
Data Recovery from Toshiba Hard disks using PC3000
Data Recovery from Samsung Hard disks using PC3000
This module covers an introduction to Solid State Drives (SSD) and different types of SSDs and their functionalities. Participants will learn an overview of firmware issues in SSD, reasons for firmware damages, and firmware repair and diagnosis of SSDs with SATA, mSATA, M.2, PCIe (NVMe/AHCI), PCIe x16, Apple Macbook etc., interface by using PC-3000 SSD software.
This module cover data recovery from SCSI/SAS & RAID arrays. The module will start with an introduction to SAS/SCSI, followed by the reasons for failure of SAS drives. Participants will then learn about the diagnosis and firmware repair of SAS drives using PC-3000 SAS software. The module will also provide an introduction to RAID, including hardware/software RAID and types of RAID such as RAID 0, RAID1, RAID5, RAID6, RAID10, RAID 50, RAID 60, JBOD, etc. Participants will also learn about recovering data from damaged RAID arrays.
This module covers the basics of flash storage devices, including an introduction to different types of flash drives such as USB, SD, and MSD. Participants will also learn about the physical structures in flash drives and the reasons for logical issues in flash drives. The module includes procedures for data recovery from physically damaged flash drives, including flash chip off and monolith procedures.
The module also covers data recovery from damaged USB flash drives (NAND flash), including removing the NAND flash from the USB, reading the NAND flash using PC3000 Flash, and applying correct preparations to rebuild the data using PC3000 Flash.
Additionally, the module covers data recovery from damaged SD cards and USB flash drives (monolith), including sanding down the MicroSD card or USB flash drive monolith, finding pinouts, reading data from pinouts using the PC3000 Spider board, and applying correct preparations to rebuild the data using PC3000 Flash.
Flash basics
Data Recovery from Damaged USB Flash Drive (Nand Flash)
Data Recovery from Damaged SD Card / USB Flash Drive (Monolith)
This module provides an in-depth understanding of hard disk mechanical structure and components. Participants will learn how to identify mechanical problems and solve issues by head or platter replacement. The module includes practical demonstrations of head and platter replacement and donor matching guides for head replacement.
Upon completion of this course, participants will have a thorough understanding of data recovery techniques for various types of storage devices such as HDD, SSD, SCSI/ SAS drives, Flash drives, SD cards, and RAID arrays they will be equipped with the knowledge and skills to diagnose and repair firmware and physical issues and recover lost data.
Practicals can also be done remotely.
Participants can join the training sessions using Cisco Webex application (meeting link will be provided by us prior to the commencement of the training sessions).
We will discuss all the theoretical concepts and show the practical demonstration using our mobiles.
Participants joining the online training sessions can perform data extraction and analysis exercises by connecting to Zoom’s systems remotely.
Date | Duration | Mode of Training | Course Outline | Price |
---|---|---|---|---|
2nd Sept –13th Sept, 2024 2:00 PM to 5:00 PM (IST - GMT +5.30) |
10 Days 3Hrs/Day | Online |
Introductory Limited Period OfferINR 1,25,000.00 |
|
16th Sept – 21st Sept, 2024 10:00 AM to 5:00 PM (IST - GMT +5.30) |
6 Days 6Hrs/Day | Offline | ||
23rd Sept – 4th Oct, 2024 2:00 PM to 5:00 PM (IST - GMT +5.30) |
10 Days 3Hrs/Day | Online | ||
7th Oct – 12th Oct, 2024 10:00 AM to 5:00 PM (IST - GMT +5.30) |
6 Days 6Hrs/Day | Offline | ||
14th OCt – 25th Oct, 2024 2:00 PM to 5:00 PM (IST - GMT +5.30) |
10 Days 3 Hrs/Day | Online | ||
28th Oct – 2nd Nov, 2024 10:00 AM to 5:00 PM (IST - GMT +5.30) |
6 Days 6 Hrs/Day | Offline | ||
4th Nov – 15th Nov, 2024 2:00 PM to 5:00 PM (IST - GMT +5.30) |
10 Days 3 Hrs/Day | Online | ||
18th Nov – 23rd Nov, 2024 10:00 AM to 5:00 PM (IST - GMT +5.30) |
6 Days 6 Hrs/Day | Offline | ||
25th Nov – 6th Dec, 2024 10:00 AM to 5:00 PM (IST - GMT +5.30) |
6 Days 6 Hrs/Day | Online | ||